ME POWER ELECTRONICS AND DRIVES

Over view

The department of Electrical and Electronics Engineering has been in existence since 2002-2003 with an intake of 60 students per year and at present the intake is 60 per year. The department has grown into a full fledged department. The M.E (Power Electronics and Drives) course has been started in the year of 2010-2011 with an intake of 18 students per year.

The department runs with the vision and mission dedicated towards producing young prospective engineers who are industry ready and skill oriented by training them on various specific field oriented verticals of electrical and electronics engineering.

The department is well equipped with all infrastructural facilities required to impart high quality education and committed towards offering output plus outcome based education to the students. Quality and experienced members and doctorate degree are involved in teaching.

Alumnae of this department are employed in the leading tire 1 and tire 2 companies in India and abroad.

Our Vision

  • To become a world class centre of learning in Electrical and Electronics Engineering, producing quality engineers who will be able to practice the profession with technical and managerial skills embedded with ethical and human values, so as to face challenges in industry and ultimately benefit the society.

Our Mission

  • To build a strong centre of learning and research in electrical and electronics engineering through a systematic education process and core research.

  • To produce quality engineers with managerial skills specialized in the domain area by utilizing the infrastructure and human resources and adopting outcome based teaching learning process.

  • To encourage the students to participate in research and development activities in the area of energy engineering and also promote entrepreneurship through industry linked initiatives.

  • To create, a pool of globally recognized professionals imbibed with human values to serve the society by integrating skill development programmes and ethical principles.

Program Educational Objectives (PEOs)

  • Graduates can

  • Find employment in Core Electrical and Electronics Engineering and service sectors.

  • Get elevated to technical lead position and lead the organization competitively.

  • Enter into higher studies leading to post-graduate and research degrees. Become consultant and provide solutions to the practical problems of core organization.

  • Become an entrepreneur and be part of electrical and electronics product and service in industries.

Program Outcomes (POs)

  • Engineering Knowledge: Apply the knowledge of mathematics, science,engineering fundamentals, and an engineering specialization to the solution of complex engineering problems.

  • Design/development of solutions: Design solutions for complex engineering problems and design system components or processes that meet the specified needs with appropriate consideration for the public health and safety, and the cultural, societal, and environmental considerations.

  • Conduct Investigations of complex problems: Use research based knowledge and research methods including design of experiments, analysis and interpretation of data, and synthesis of the information to provide valid conclusions

  • Modern tool usage: Create, select, and apply appropriate techniques, resources, and modern engineering and IT tools including prediction and modeling to complex engineering activities with an understanding of the limitations.

  • The engineer and society: Apply reasoning informed by the contextual knowledge to assess societal, health, safety, legal and cultural issues and the consequent responsibilities relevant to the professional engineering practice.

  • Environment and sustainability: Understand the impact of the professional engineering solutions in societal and environmental contexts, and demonstrate. the knowledge of, and need for sustainable development.

  • Ethics: Apply ethical principles and commit to professional ethics and responsibilities and norms of the engineering practice.

  • Individual and team work: Function effectively as an individual, and as a member or leader in diverse teams, and in multidisciplinary settings.

  • Communication: Communicate effectively on complex engineering activities with the engineering community and with society at large, such as, being able to comprehend and write effective reports and design documentation, make effective presentations, and give and receive clear instructions.

  • Project management and finance: Demonstrate knowledge and understanding of the engineering and management principles and apply these to ones own work, as a member and leader in a team, to manage projects and in multidisciplinary environments.

  • Life-long learning: Recognize the need for, and have the preparation and ability to engage in independent and life-long learning in the broadest context of technological change.

Program Specific Outcomes (PSOs)

  • The Students will be able to

  • Ability to understand the principles and working of electrical components, circuits, systems and control that are forming a part of power generation, transmission, distribution, utilization, conservation and energy saving. Students can assess the power management, auditing, crisis and energy saving aspects.

  • Ability to apply mathematical methodologies to solve problems related with electrical engineering using Ability to use knowledge in various domains to identify research gaps and hence to provide solution which leads to new ideas and innovations.

COURSE OUTCOMES(COs)

MA3303 PROBABILITY AND COMPLEX FUNCTION

  • COURSE OUTCOMES:

  • At the end of the course, learners will be able

  • CO1: Understand the fundamental knowledge of the concepts of probability and have knowledge of standard distributions which can describe real life phenomenon.

  • CO2: Understand the basic concepts of one and two dimensional random variables and apply in engineering applications./p>

  • CO3: To develop an understanding of the standard techniques of complex variable theory in particular analytic function and its mapping property.

  • CO4: To familiarize the students with complex integration techniques and contour integration techniques which can be used in real integrals.

  • CO4: : To acquaint the students with Differential Equations which are significantly used in engineering problems.

EE3301 ELECTROMAGNETIC FIELDS

  • COURSE OUTCOMES:

  • At the end of the course, learners will be able

  • CO1: Visualize and explain Gradient, Divergence, and Curl operations on electromagnetic vector fieldsand identify the electromagnetic sources and their effects.

  • CO2: Compute and analyse electrostatic fields, electric potential, energy density along with their applications.

  • CO3: Compute and analyse magneto static fields, magnetic flux density, vector potential along with their applications.

  • CO4: Explain different methods of emf generation and Maxwell’s equations.

  • CO5: Explain the concept of electromagnetic waves and characterizing.

EE3302 DIGITAL LOGIC CIRCUITS

  • COURSE OUTCOMES:

  • At the end of the course, learners will be able

  • CO1: Explain various number systems and characteristics of digital logic families.

  • CO2: Apply K-maps and Quine McCluskey methods to simplify the given Boolean expressions.

  • CO3: Explain the implementation of combinational circuit such as multiplexers and de multiplexers - code converters, adders, subtractors, Encoders and Decoders

  • CO4: Design various synchronous and asynchronous circuits using Flip Flops.

  • CO5: Explain asynchronous sequential circuits and programmable logic devices.

  • CO6: Use VHDL for simulating and testing RTL, combinatorial and sequential circuits.

EC3301 ELECTRON DEVICES AND CIRCUITS

  • COURSE OUTCOMES:

  • At the end of the course, learners will be able

  • CO1: Explain the structure and operation of PN junction devices (diode, Zener diode, LED and Laser diode).

  • CO2: Design clipper, clamper, half wave and full wave rectifier, regulator circuits using PN junction diodes.

  • CO3: Analyze the structure and characteristics BJT, FET, MOSFET, UJT Thyristor and IGBT.

  • CO4: Analyze the performance of various configurations of BJT and MOSFET based amplifier

  • CO5: Explain the operation of various feedback amplifiers and oscillators.

  • CO6: Explain the operation of various feedback amplifiers and oscillators.

EE3303 ELECTRICAL MACHINES-I

  • COURSE OUTCOMES:

  • At the end of the course, learners will be able

  • CO1: Apply the laws governing the electromechanical energy conversion for singly and multiple excited systems.

  • CO2: Explain the construction and working principle of DC machines.

  • CO3: Interpret various characteristics of DC machines.

  • CO4: Compute various performance parameters of the machine, by conducting suitable tests.

  • CO5: Draw the equivalent circuit of transformer and predetermine the efficiency and regulation.

  • CO6: Describe the working principle of auto transformer, three phase transformer with different types of connection.

CS3353 C PROGRAMMING AND DATA STRUCTURES

  • COURSE OUTCOMES:

  • At the end of the course, learners will be able

  • CO1: Develop C programs for any real world/technical application.

  • CO2: Apply advanced features of C in solving problems.

  • CO3: Write functions to implement linear and non–linear data structure operations.

  • CO4: Suggest and use appropriate linear/non–linear data structure operations for solving a given problem.

  • CO5: Appropriately use sort and search algorithms for a given application.

  • CO6: Apply appropriate hash functions that result in a collision free scenario for data storage.

EC3311 ELECTRONIC DEVICES AND CIRCUITS LABORATORY

  • COURSE OUTCOMES:

  • At the end of the course, learners will be able

  • CO1: Analyze the characteristics of PN, Zener diode and BJT in CE,CC,CB configurations experimentally.

  • CO2: Analyze the characteristics of JFET and UJT experimentally.

  • CO3: Analyze frequency response characteristics of a Common Emitter amplifier experimentally.

  • CO4: Analyze the characteristics of RC phase shift and LC oscillators experimentally.

  • CO5: Analyze the characteristics of half-wave and full-wave rectifier with and without filters experimentally.

  • CO6: Analyze the characteristics of FET based differential amplifier experimentally.

  • CO7: Calculate the frequency and phase angle using CRO experimentally.

  • CO8: Analyze the frequency response characteristics of passive filters experimentally.

CS3351 DIGITAL PRINCIPLES AND COMPUTER ORGANIZATION

  • COURSE OUTCOMES:

  • At the end of the course, learners will be able

  • CO1: Design various combinational digital circuits using logic gates.

  • CO2: Design sequential circuits and analyze the design procedures.

  • CO3: State the fundamentals of computer systems and analyze the execution of an instruction.

  • CO4: Analyze different types of control design and identify hazards.

  • CO5: Identify the characteristics of various memory systems and I/O communication.

EE3311 ELECTRICAL MACHINES LABORATORY – I

  • COURSE OUTCOMES:

  • At the end of the course, learners will be able

  • CO1: Construct the circuit with appropriate connections for the given DC machine/transformer.

  • CO2: Experimentally determine the characteristics of different types of DC machines.

  • CO3: Demonstrate the speed control techniques for a DC motor for industrial applications.

  • CO4: Identify suitable methods for testing of transformer and DC machines.

  • CO5: Predetermine the performance parameters of transformers and DC motor.

  • CO5: Understand DC motor starters and 3-phase transformer.

CS3362 C PROGRAMMING AND DATA STRUCTURES LABORATORY

  • COURSE OUTCOMES:

  • At the end of the course, learners will be able

  • CO1: Use different constructs of C and develop application

  • CO2: Write functions to implement linear and non-linear data structure operations.

  • CO3: Suggest and use the appropriate linear / non-linear data structure operations for a given problem.

  • CO4: Apply appropriate hash functions that result in a collision free scenario for data storage and Retrieval.

  • CO5: Implement Sorting and searching algorithms for a given application.

GE3361 PROFESSIONAL DEVELOPMENT

  • COURSE OUTCOMES:

  • At the end of the course, learners will be able

  • CO1: Use MS Word to create quality documents, by structuring and organizing content for their day to day technical and academic requirements

  • CO2: Use MS EXCEL to perform data operations and analytics, record, retrieve data as per requirements and visualize data for ease of understanding.

  • CO3: Use MS PowerPoint to create high quality academic presentation by including common tables, charts, graphs, interlinking other elements, and using media presentations by including common tables, charts, graphs, interlinking other elements, and using media .

GE3451 ENVIRONMENTAL SCIENCES AND SUSTAINABILITY

  • COURSE OUTCOMES:

  • At the end of the course, learners will be able

  • CO1: To recognize and understand the functions of environment, ecosystems and biodiversity and their conservation.

  • CO2: To identify the causes, effects of environmental pollution and natural disasters and contribute to the preventive measures in the society.

  • CO3: To identify and apply the understanding of renewable and non-renewable resources and contribute to the sustainable measures to preserve them for future generations.

  • CO4: To recognize the different goals of sustainable development and apply them for suitable technological advancement and societal development.

  • CO5: To demonstrate the knowledge of sustainability practices and identify green materials, energy cycles and the role of sustainable urbanization.

EE3402 LINEAR INTEGRATED CIRCUITS

  • COURSE OUTCOMES:

  • At the end of the course, learners will be able

  • CO1: Explain monolithic IC fabrication process.

  • CO2: Explain the fabrication of diodes, capacitance, resistance, FETs and PV Cell.

  • CO3: Analyze the characteristics and basic applications(inverting/non-inverting amplifier, summer, differentiator, integrator, V/I and I/V converter) of Op-Amp.

  • CO4: Explain circuit and applications of op-amp based instrumentation amplifier, log/antilog amplifier ,analog multiplier /divider, active filters, comparators wavefogenerators, A/D and D/A converters.

  • CO5: Explain Functional blocks, characteristics and applications of Timer, PLL, analog multiplier ICs.

  • CO6: Explain the applications of ICs in Instrumentation amplifier, fixed and variable voltage regulator, SMPS and function generations.

EE3401 TRANSMISSION AND DISTRIBUTION

  • COURSE OUTCOMES:

  • At the end of the course, learners will be able

  • CO1: Understand the structure of power system, computation of transmission line parameters for different configuration.

  • CO2: Model the transmission lines to determine the line performance and to understand the impact of Ferranti effect and corona on line performance.

  • CO3: Do Mechanical design of transmission lines, grounding and to understand about the insulators in transmission system.

  • CO4: Design the underground cables and understand the performance analysis of underground cable.

  • CO5: Understand the modeling, performance analysis and modern trends in distribution system.

EE3403 MEASUREMENTS AND INSTRUMENTATION

  • COURSE OUTCOMES:

  • At the end of the course, learners will be able

  • CO1: Ability to understand the fundamental art of measurement in engineering.

  • CO2: Ability to understand the structural elements of various instruments.

  • CO3: Ability to understand the importance of bridge circuits.

  • CO4: Ability to understand about various transducers and their characteristics by experiments.

  • CO5: Ability to understand about various transducers and their characteristics by experiments.

EE3404 MICROPROCESSOR AND MICROCONTROLLER

  • COURSE OUTCOMES:

  • At the end of the course, learners will be able

  • CO1: Ability to write assembly language program for microprocessor and microcontroller

  • CO2: Ability to design and implement interfacing of peripheral with microprocessor and microcontroller.

  • CO3: Ability to analyze, comprehend, design and simulate microprocessor based systems used for control and monitoring.

  • CO4: Ability to analyze, comprehend, design and simulate microcontroller based Systems used for control and monitoring.

  • CO5: Ability to understand and appreciate advanced architecture evolving microprocessor .

EE3405 ELECTRICAL MACHINES – II

  • COURSE OUTCOMES:

  • At the end of the course, learners will be able

  • CO1: Ability to understand the construction and working principle of Synchronous generator.

  • CO2: Ability to understand the construction and working principle of Synchronous Motor.

  • CO3: Ability to understand the construction and working principle of Three Phase Induction Motor.

  • CO4: Acquire knowledge about the starting and speed control of induction motors.

  • CO5: To gain knowledge about the basic principles and working of Single phase induction motors and Special Electrical Machines.

EE3411 ELECTRICAL MACHINES-II LABORATORY

  • COURSE OUTCOMES:

  • At the end of the course, learners will be able

  • CO1: Ability to understand and analyze EMF and MMF methods.

  • CO2: Ability to analyze the characteristics of V and Inverted V curves.

  • CO3: Acquire hands on experience of conducting various tests on alternators and obtaining their performance indices using standard analytical as well as graphical methods. to understand the importance of Synchronous machines.

  • CO4: Acquire hands on experience of conducting various tests on induction motors and obtaining their performance indices using standard analytical as well as graphica lmethods. to understand the importance of single and three phase Induction motors.

  • CO5: Ability to acquire knowledge on separation of losseCO1: Construct automata theory using Finite Automation.

EE3412 LINEAR AND DIGITAL CIRCUITS LABORATORY

  • COURSE OUTCOMES:

  • At the end of the course, learners will be able

  • CO1: Ability to understand and implement Boolean Functions.

  • CO2: Ability to understand the importance of code conversion

  • CO3: Ability to Design and implement circuits with digital ICs like decoders, multiplexers, register.

  • CO4: Ability to acquire knowledge on Application of Op-Amp.

  • CO5: Ability to Design and implement counters using analog ICs like timers, VCOs and digital ICs like Flip-flops and counters.

EE3413 MICROPROCESSOR AND MICROCONTROLLER LABORATORY

  • COURSE OUTCOMES:

  • At the end of the course, learners will be able

  • CO1: Ability to write assembly language program for microprocessor.

  • CO2: Ability to write assembly language program for microcontroller.

  • CO3: Ability to design and implement interfacing of peripheral with microprocessor and microcontroller.

  • CO4: Ability to analyze, comprehend, design and simulate microprocessor based systems used for control and monitoring.

  • CO5: Ability to analyze, comprehend, design and simulate microcontroller based systems used for control and monitoring.